H3C Technologies H3C SR8800 User Manual

Page 419

403

Configure IS-IS:
# Configure Router C.

system-view

[RouterC] isis

[RouterC-isis-1] is-level level-2

[RouterC-isis-1] network-entity 10.0000.0000.0001.00

[RouterC-isis-1] quit

[RouterC] interface POS 2/1/2

[RouterC-POS2/1/2] isis enable

[RouterC-POS2/1/2] quit

[RouterC] interface GigabitEthernet1/1/1

[RouterC-GigabitEthernet1/1/1] isis enable

[RouterC-GigabitEthernet1/1/1] quit

[RouterC] interface GigabitEthernet1/1/2

[RouterC-GigabitEthernet1/1/2] isis enable

[RouterC-GigabitEthernet1/1/2] quit

[RouterC] interface GigabitEthernet1/1/3

[RouterC-GigabitEthernet1/1/3] isis enable

[RouterC-GigabitEthernet1/1/3] quit

# Configure Router B.

system-view

[RouterB] isis

[RouterB-isis-1] is-level level-2

[RouterB-isis-1] network-entity 10.0000.0000.0002.00

[RouterB-isis-1] quit

[RouterB] interface POS 2/1/2

[RouterB-POS2/1/2] clock master

[RouterB-POS2/1/2] isis enable

[RouterB-POS2/1/2] quit

Configure OSPF and route redistribution:
# Configure OSPF on Router A.

system-view

[RouterA] ospf

[RouterA-ospf-1] area 0

[RouterA-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255

[RouterA-ospf-1-area-0.0.0.0] quit

[RouterA-ospf-1] quit

# On Router B, configure OSPF and enable route redistribution from IS-IS.

[RouterB] ospf

[RouterB-ospf-1] area 0

[RouterB-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255

[RouterB-ospf-1-area-0.0.0.0] quit

[RouterB-ospf-1] import-route isis 1

[RouterB-ospf-1] quit

# Display the OSPF routing table on Router A. The redistributed routes are available.

[RouterA] display ospf routing

This manual is related to the following products: