H3C Technologies H3C SR8800 User Manual

Page 207

191

[RouterA-isis-1] quit

[RouterA] interface GigabitEthernet 3/1/1

[RouterA-GigabitEthernet3/1/1] isis enable

[RouterA-GigabitEthernet3/1/1] quit

[RouterA] interface GigabitEthernet 3/1/2

[RouterA-GigabitEthernet3/1/2] isis enable

[RouterA-GigabitEthernet3/1/2] quit

# Configure Router B.

system-view

[RouterB] isis

[RouterB-isis-1] network-entity 10.0000.0000.0002.00

[RouterB-isis-1] quit

[RouterB] interface GigabitEthernet 3/1/1

[RouterB-GigabitEthernet3/1/1] isis enable

[RouterB-GigabitEthernet3/1/1] quit

[RouterB] interface GigabitEthernet 3/1/2

[RouterB-GigabitEthernet3/1/2] isis enable

[RouterB-GigabitEthernet3/1/2] quit

# Configure Router C.

system-view

[RouterC] isis

[RouterC-isis-1] network-entity 10.0000.0000.0003.00

[RouterC-isis-1] quit

[RouterC] interface GigabitEthernet 3/1/1

[RouterC-GigabitEthernet3/1/1] isis enable

[RouterC-GigabitEthernet3/1/1] quit

[RouterC] interface GigabitEthernet 3/1/2

[RouterC-GigabitEthernet3/1/2] isis enable

[RouterC-GigabitEthernet3/1/2] quit

Configure BFD functions:
# Enable BFD on Router A and configure BFD parameters.

[RouterA] bfd session init-mode active

[RouterA] interface GigabitEthernet 3/1/1

[RouterA-GigabitEthernet3/1/1] isis bfd enable

[RouterA-GigabitEthernet3/1/1] bfd min-receive-interval 500

[RouterA-GigabitEthernet3/1/1] bfd min-transmit-interval 500

[RouterA-GigabitEthernet3/1/1] bfd detect-multiplier 7

# Enable BFD on Router B and configure BFD parameters.

[RouterB] bfd session init-mode active

[RouterB] interface GigabitEthernet 3/1/1

[RouterB-GigabitEthernet3/1/1] isis bfd enable

[RouterB-GigabitEthernet3/1/1] bfd min-receive-interval 500

[RouterB-GigabitEthernet3/1/1] bfd min-transmit-interval 500

[RouterB-GigabitEthernet3/1/1] bfd detect-multiplier 8

Verify the configuration:
The following configurations are performed on Router A. Configurations on Router B are similar.
(Details not shown)

This manual is related to the following products: