H3C Technologies H3C SR8800 - Manual (Page 199)

183
IPV4 Destination IntCost ExtCost ExitInterface NextHop Flags
--------------------------------------------------------------------------
10.1.1.0/24 10 NULL GE3/1/2 Direct D/L/-
10.1.2.0/24 10 NULL GE3/1/1 Direct D/L/-
192.168.0.0/24 10 NULL GE3/1/3 Direct D/L/-
Flags: D-Direct, R-Added to RM, L-Advertised in LSPs, U-Up/Down Bit Set
[RouterD] display isis route
Route information for ISIS(1)
-----------------------------
ISIS(1) IPv4 Level-2 Forwarding Table
-------------------------------------
IPV4 Destination IntCost ExtCost ExitInterface NextHop Flags
--------------------------------------------------------------------------
192.168.0.0/24 10 NULL GE3/1/1 Direct D/L/-
10.1.1.0/24 20 NULL GE3/1/1 192.168.0.1 R/-/-
10.1.2.0/24 20 NULL GE3/1/1 192.168.0.1 R/-/-
Flags: D-Direct, R-Added to RM, L-Advertised in LSPs, U-Up/Down Bit Set
3. Configure RIPv2 on Router D and Router E, and configure route redistribution from RIP to IS-IS on
Router D:
# Configure RIPv2 on Router D.
[RouterD] rip 1
[RouterD-rip-1] network 10.0.0.0
[RouterD-rip-1] version 2
[RouterD-rip-1] undo summary
# Configure RIPv2 on Router E.
[RouterE] rip 1
[RouterE-rip-1] network 10.0.0.0
[RouterE-rip-1] version 2
[RouterE-rip-1] undo summary
# Configure route redistribution from RIP to IS-IS on Router D.
[RouterD-rip-1] quit
[RouterD] isis 1
[RouterD–isis-1] import-route rip level-2
# Display IS-IS routing information on Router C.
[RouterC] display isis route
Route information for ISIS(1)
-----------------------------
ISIS(1) IPv4 Level-1 Forwarding Table
-------------------------------------