H3C Technologies H3C SR8800 - Manual (Page 191)

175
Level-2 Link State Database
LSPID Seq Num Checksum Holdtime Length ATT/P/OL
------------------------------------------------------------------------
0000.0000.0003.00-00* 0x00000013 0xbb56 1026 100 0/0/0
0000.0000.0004.00-00 0x00000005 0xd086 904 84 0/0/0
*-Self LSP, +-Self LSP(Extended), ATT-Attached, P-Partition, OL-Overload
[RouterD] display isis lsdb
Database information for ISIS(1)
--------------------------------
Level-2 Link State Database
LSPID Seq Num Checksum Holdtime Length ATT/P/OL
------------------------------------------------------------------------
0000.0000.0003.00-00 0x00000013 0xbb56 910 100 0/0/0
0000.0000.0004.00-00* 0x00000005 0xd086 791 84 0/0/0
*-Self LSP, +-Self LSP(Extended), ATT-Attached, P-Partition, OL-Overload
# Display the IS-IS routing information of each router. The routing table of Level-1 routers must
contain a default route with the next hop being the Level-1-2 router. The routing table of Level-2
router must contain all routes of Level-1 and Level-2.
[RouterA] display isis route
Route information for ISIS(1)
-----------------------------
ISIS(1) IPv4 Level-1 Forwarding Table
-------------------------------------
IPV4 Destination IntCost ExtCost ExitInterface NextHop Flags
--------------------------------------------------------------------------
10.1.1.0/24 10 NULL POS2/1/1 Direct D/L/-
10.1.2.0/24 20 NULL POS2/1/1 10.1.1.1 R/-/-
192.168.0.0/24 20 NULL POS2/1/1 10.1.1.1 R/-/-
0.0.0.0/0 10 NULL POS2/1/1 10.1.1.1 R/-/-
Flags: D-Direct, R-Added to RM, L-Advertised in LSPs, U-Up/Down Bit Set
[RouterC] display isis route
Route information for ISIS(1)
-----------------------------