H3C Technologies H3C SR8800 - Manual (Page 329)

313
[RouterC-POS3/1/1] ospfv3 1 area 0
[RouterC-POS3/1/1] quit
[RouterC] interface POS 3/1/2
[RouterC-POS3/1/2] ospfv3 1 area 2
[RouterC-POS3/1/2] quit
# Configure Router D
system-view
[RouterD] ipv6
[RouterD] ospfv3 1
[RouterD-ospfv3-1] router-id 4.4.4.4
[RouterD-ospfv3-1] quit
[RouterD] interface POS 3/1/2
[RouterD-POS3/1/2] ospfv3 1 area 2
[RouterD-POS3/1/2] quit
# Display OSPFv3 neighbor information on Router B.
[RouterB] display ospfv3 peer
OSPFv3 Area ID 0.0.0.0 (Process 1)
----------------------------------------------------------------------
Neighbor ID Pri State Dead Time Interface Instance ID
3.3.3.3 1 Full/Backup 00:00:34 POS3/1/1 0
OSPFv3 Area ID 0.0.0.1 (Process 1)
----------------------------------------------------------------------
Neighbor ID Pri State Dead Time Interface Instance ID
1.1.1.1 1 Full/DR 00:00:35 POS3/1/2 0
# Display OSPFv3 neighbor information on Router C.
[RouterC] display ospfv3 peer
OSPFv3 Area ID 0.0.0.0 (Process 1)
----------------------------------------------------------------------
Neighbor ID Pri State Dead Time Interface Instance ID
2.2.2.2 1 Full/DR 00:00:35 POS3/1/1 0
OSPFv3 Area ID 0.0.0.2 (Process 1)
----------------------------------------------------------------------
Neighbor ID Pri State Dead Time Interface Instance ID
4.4.4.4 1 Full/Backup 00:00:36 POS3/1/2 0
# Display OSPFv3 routing information on Router D.
[RouterD] display ospfv3 routing
E1 - Type 1 external route, IA - Inter area route, I - Intra area route
E2 - Type 2 external route, * - Seleted route
OSPFv3 Router with ID (4.4.4.4) (Process 1)
------------------------------------------------------------------------