H3C Technologies H3C SR8800 - Manual (Page 20)

4
Route redistribution
Different routing protocols running on a network learn route information from each other through route
redistribution. Each routing protocol can redistribute routes from other protocols, direct routes, and static
routes. For more information, see relevant protocols in this configuration guide.
Displaying and maintaining a routing table
Task Command Remarks
Display brief information about the
active routes in the routing table.
display ip routing-table [ vpn-instance
vpn-instance-name ] [ verbose ] [ | { begin
| exclude | include } regular-expression ]
Available in any view
Display information about routes to
the specified destination.
display ip routing-table [ vpn-instance
vpn-instance-name ] ip-address [ mask |
mask-length ] [ longer-match ] [ verbose ]
[ | { begin | exclude | include }
regular-expression ]
Available in any view
Display information about routes
with destination addresses in the
specified range.
display ip routing-table [ vpn-instance
vpn-instance-name ] ip-address1 { mask |
mask-length } ip-address2 { mask |
mask-length } [ verbose ] [ | { begin |
exclude | include } regular-expression ]
Available in any view
Display information about routes
permitted by an IPv4 basic ACL.
display ip routing-table [ vpn-instance
vpn-instance-name ] acl acl-number
[ verbose ] [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display routing information
permitted by an IPv4 prefix list.
display ip routing-table [ vpn-instance
vpn-instance-name ] ip-prefix
ip-prefix-name [ verbose ] [ | { begin |
exclude | include } regular-expression ]
Available in any view
Display routes of a routing
protocol.
display ip routing-table [ vpn-instance
vpn-instance-name ] protocol protocol
[ inactive | verbose ] [ | { begin | exclude
| include } regular-expression ] [ | { begin
| exclude | include } regular-expression ]
[ | { begin | exclude | include }
regular-expression ]
Available in any view
Display statistics about the routing
table.
display ip routing-table [ vpn-instance
vpn-instance-name ] statistics [ | { begin |
exclude | include } regular-expression ]
Available in any view
Clear statistics for the routing table.
reset ip routing-table statistics protocol
[ vpn-instance vpn-instance-name ] { all |
protocol }
Available in user view
Display brief IPv6 routing table
information.
display ipv6 routing-table [ vpn-instance
vpn-instance-name ] [ | { begin | exclude
| include } regular-expression ]
Available in any view
Display verbose IPv6 routing table
information.
display ipv6 routing-table [ vpn-instance
vpn-instance-name ] verbose [ | { begin |
exclude | include } regular-expression ]
Available in any view