H3C Technologies H3C SR8800 - Manual (Page 366)

350
Step Command Remarks
4. Configure the filtering of
outgoing routes.
filter-policy { acl6-number | ipv6-prefix
ipv6-prefix-name } export [ protocol
process-id ]
Not configured by default
5. Apply a routing policy to
routes advertised to an IPv6
peer/peer group.
peer { ipv6-group-name | ipv6-address }
route-policy route-policy-name export
Not applied by default
6. Specify an IPv6 ACL to filter
routes advertised to an IPv6
peer/peer group.
peer { ipv6-group-name | ipv6-address }
filter-policy acl6-number export
Not specified by default
7. Specify an AS path ACL to
filter routes advertised to an
IPv6 peer/peer group.
peer { ipv6-group-name | ipv6-address }
as-path-acl as-path-acl-number export
Not specified by default
8. Specify an IPv6 prefix list to
filter routes advertised to an
IPv6 peer/peer group.
peer { ipv6-group-name | ipv6-address }
ipv6-prefix ipv6-prefix-name export
Not specified by default
NOTE:
•
The members of a peer group and the peer group must be configured with the same route advertisement
policy.
• IPv6 BGP advertises routes passing the specified policy to peers. Using the protocol argument can filter
only the routes redistributed from the specified protocol. If no protocol is specified, IPv6 BGP filters all
routes to be advertised, including redistributed routes and routes imported with the network command.
Configuring inbound route filtering
To configure inbound route filtering:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter BGP view. bgp as-number N/A
3. Enter IPv6 address family
view.
ipv6-family N/A
4. Configure inbound route
filtering.
filter-policy { acl6-number |
ipv6-prefix ipv6-prefix-name }
import
Not configured by default
5. Apply a routing policy to
routes from an IPv6 peer/peer
group.
peer { ipv6-group-name |
ipv6-address } route-policy
route-policy-name import
Not applied by default
6. Specify an ACL to filter routes
imported from an IPv6
peer/peer group.
peer { ipv6-group-name |
ipv6-address } filter-policy
acl6-number import
Not specified by default
7. Specify an AS path ACL to
filter routing information
imported from an IPv6
peer/peer group.
peer { ipv6-group-name |
ipv6-address } as-path-acl
as-path-acl-number import
Not specified by default