H3C Technologies H3C SR8800 - Manual (Page 380)

364
Step Command Remarks
5. Enable the 6PE peer or peer
group. peer { ipv4-group-name |
ipv4-address | ipv6-address } enable Not enabled by default
6. Advertise community attribute
to the 6PE peer or peer group. peer { group-name | ipv4-address }
advertise-community Optional
Not advertised by default
7. Advertise extended
community attribute to the 6PE
peer or peer group.
peer { group-name | ipv4-address }
advertise-ext-community Optional
Not advertised by default
8. Allow the local AS number to
appear in routes from the peer
or peer group and specify the
repeat times.
peer { group-name | ipv4-address }
allow-as-loop [ number ]
Optional
Not allowed by default
9. Specify an AS path ACL to
filter routes from or to the 6PE
peer or peer group.
peer { group-name | ipv4-address }
as-path-acl as-path-acl-number
{ import | export }
Optional
Not configured by default.
10. Advertise a default route to
the 6PE peer or peer group.
peer { group-name | ipv4-address }
default-route-advertise [ route-policy
route-policy-name ]
Optional
Not advertised by default.
11. Configure an inbound or
outbound IPv6 ACL based
filtering policy for the 6PE
peer or peer group.
peer { group-name | ipv4-address }
filter-policy acl6-number { import |
export }
Optional
Not configured by default.
12. Add an 6PE peer to an
existing peer group. peer ipv4-address group group-name
[ as-number as-number ] Optional
Not added by default
13. Configure an inbound or
outbound IPv6 prefix list
based filtering policy for the
6PE peer or peer group.
peer { group-name | ipv4-address }
ipv6-prefix ipv6-prefix-name { import
| export }
Optional
Not configured by default.
14. Keep all routes from the 6PE
peer or peer group, including
routes not passing the
inbound filtering policy.
peer { group-name | ipv4-address }
keep-all-routes
Optional
Not kept by default
15. Configure the router as a route
reflector and the 6PE peer or
peer group as a client.
peer { group-name | ipv4-address }
reflect-client Optional
Not configured by default.
16. Configure an upper limit of
IPv6 address prefixes that can
be received from the 6PE peer
or peer group.
peer { group-name | ipv4-address }
route-limit limit [ percentage ] Optional
No limitation by default
17. Apply a routing policy to
routes outgoing or incoming
from the 6PE peer or peer
group.
peer { group-name | ipv4-address }
route-policy route-policy-name
{ import | export }
Optional
Not applied by default.
18. Display information about the
6PE peer or peer group.
display bgp ipv6 peer [ group-name
log-info | ipv4-address verbose ] [ |
{ begin | exclude | include }
regular-expression ]
Optional
Available in any view