H3C Technologies H3C SR8800 - Manual (Page 391)

375
*> Network : 2::2 PrefixLen : 128
NextHop : ::1 LocPrf :
PrefVal : 0 Label : NULL
MED : 0
Path/Ogn: ?
*>i Network : 3::3 PrefixLen : 128
NextHop : ::FFFF:3.3.3.3 LocPrf : 100
PrefVal : 0 Label : NULL
MED : 0
Path/Ogn: ?
*>i Network : 4::4 PrefixLen : 128
NextHop : ::FFFF:3.3.3.3 LocPrf : 100
PrefVal : 0 Label : NULL
MED : 0
Path/Ogn: ?
After the above configuration, you can ping through the IPv6 address 4::4 of CE 2 from CE 1.
IPv6 BGP IPsec policy configuration
Network requirements
As shown in the following figure,
• Configure IPv6 BGP on the routers. Routers A and B establish an IBGP relationship. Routers B and
C establish an EBGP relationship.
• Configure IPsec policies on the routers to authenticate and encrypt protocol packets.
Network Diagram
Figure 121 Network diagram
Configuration procedure
1. Configure IPv6 addresses for interfaces. (Details not shown)
2. Configure the IBGP connection:
# Configure Router A.
system-view
[RouterA] ipv6
[RouterA] bgp 65008
[RouterA-bgp] router-id 1.1.1.1
[RouterA-bgp] ipv6-family