Create a jacob’s ladder make reverb ring out, Create a jacob’s ladder, Make reverb ring out – Adobe Premiere Pro CC v.7.xx User Manual
Page 482
Facebook posts are not covered under the terms of Creative Commons.
1. Place a Transparent Video clip in a video track above the original clip.
2. Apply the Lightning effect to the Transparent Video clip.
3. Trim the Transparent Video clip to the duration needed for the appearance of lightning.
Create a Jacob’s Ladder
You can create a Jacob’s Ladder effect. The lightning bolt snaps back to a position along the start line after it has been pulled in a given direction.
1. Apply the Lightning effect to a clip.
2. In the Effect Controls panel, click the triangle next to Lighting to expose the Lightning controls.
3. Experiment with different combinations of settings for these three controls.
Stability
Pull Force
Pull Direction
A Stability value that is too low doesn’t allow the lightning to be stretched into an arc before it snaps back. A value that is too high lets the
lightning bolt bounce around.
Make reverb ring out
With the Reverb effect, you can make the audio of a clip ring out, that is make the last sound of the clip continue ringing past the end of the sound
itself.
1. Extend the Out point of the clip to the duration at which you want the ringing to end.
2. At the end of the last sound you want heard, drop the volume to zero.
3. Apply the Reverb effect.
Adobe also recommends
485