Adobe Premiere Pro CC v.7.xx - Manual (Page 159)

Twitter™ and Facebook posts are not covered under the terms of Creative Commons.
Legal Notices | Online Privacy Policy
To start a new project using a capture card, click New Project, select the capture card’s preset (if available) from the Load Preset pane,
and click OK.
To open an existing project using a capture card, select an existing project that was set up with the capture card’s preset.
To start a new project using an external device, such as a camcorder or deck, to digitize, click New Project, select a DV or HDV preset
that matches your target television standard and format, and click OK.
To open an existing project using an external device, such as a camcorder or deck, to digitize, select an existing project that was set up
with the correct DV or HDV preset.
10. (Optional) Specify how Premiere Pro maps the audio channels from the digitizing device to audio tracks. Select Edit > Preferences > Audio
(Windows), or Premiere Pro > Preferences > Audio (Mac OS). In the Source Channel Mapping pane, select an audio channel format from
the Default Track Format menu.
11. Choose File > Capture.
12. In the Capture panel, carefully check the settings on the Settings pane. If you need to change them, click Edit. (If you’re using a capture
card, the settings are provided by the card manufacturer’s plug-in software, not by Premiere Pro, and vary according to the capture card’s
brand and model. See the documentation for the software driver provided by the capture card manufacturer.)
13. Do one of the following:
If the digital device offers no device control, cue up your source using the analog device’s own controls. Press Play on the analog device
and click the Record button in the Capture panel.
If the digital device offers device control, capture or log footage using the Capture panel’s controls, as you would with a digital source.
Adobe also recommends
162