EXFO FTB/IQS-88000 Series Power Blazer for FTB-2/2Pro/500/IQS-600 - Manual (Page 89)

Test Setup - Test Configurator, Timer, and System
Power Blazer 77
Modify Structure Button
Modify Structure Button
From the Test menu, tap Setup, Test Configurator, and the Modify
Structure button.
For Transport Test Applications
TX/RX allows the configuration of the following parameters for either
TX/RX or TX and RX in Decoupled topology.

Interface/Rate: Select the desired interface rate. Choices depend on
the selected test and the rates available on the module.
Test Interface/Rate
OTN (Parallel) OTU4 (10 Lanes) [111.81 Gbit/s]
OTU4 (4 Lanes) [111.81 Gbit/s]
OTU3e2 (4 Lanes) [44.583 Gbit/s]
OTU3e1 (4 Lanes) [44.571 Gbit/s]
OTU3 (4 Lanes) [43.018 Gbit/s]
OTN (Serial) OTU3 [43.018 Gbit/s]
OTU3e1 [44.571 Gbit/s]
OTU3e2 [44.583 Gbit/s]
OTU2 [10.709 Gbit/s]
OTU1e [11.049 Gbit/s]
OTU2e [11.096 Gbit/s]
OTU1f [11.270 Gbit/s]
OTU2f [11.318 Gbit/s]
OTU1 [2.666 Gbit/s]
SONET (Serial) OC-768 [39.813 Gbit/s]
OC-192 [9.953 Gbit/s]
OC-48 [2.488 Gbit/s]
OC-12 [622.08 Mbit/s]
OC-3 [155.520 Mbit/s]
OC-1 [51.840 Mbit/s]
STS-3e [155.520 Mbit/s]
STS-1e [51.840 Mbit/s]