EXFO FTB/IQS-88000 Series Power Blazer for FTB-2/2Pro/500/IQS-600 - Manual (Page 193)

Test Setup - Test Configurator, Timer, and System
Power Blazer 181
S-OAM and MPLS-TP OAM
Pass/Fail Verdict
Pass/Fail Verdict check box when selected (default) enables the use of the
pass/fail verdict. A global fail verdict is declared when any of the following
condition is met: Link Down alarm, Loss Continuity alarm, or any fail
verdict for Frame Delay, Frame Loss, Synthetic Loss
1
, Frame Delay
Failure, Frame Loss Failure, Synthetic Loss Failure
1
, Loopback Failure,
or Test Failure.
Thresholds
Available with G.8113.1, Y.1731 and MEF OAM Modes when Pass/Fail verdict
is enabled.

Frame Delay Threshold (ms) allows to set the threshold
2
value of
frame delay: 0.001 to 8000 ms (default is 50 ms).

Frame Loss Threshold (%) allows to set the threshold
2
value of frame
loss: 0.001 to 100% (default is 10%).

Synthetic Loss Threshold (%)
3
allows to set the threshold
2
value of
Synthetic Loss: 0.001 to 100% (default is 10%).
1. Only applicable to Ethernet OAM.
2. The verdict is PASS when the measured value is lower or equal to the threshold value.
3. Available with Ethernet OAM (Y.1731 and MEF).