EXFO FTB/IQS-88000 Series Power Blazer for FTB-2/2Pro/500/IQS-600 - Manual (Page 399)

Test Results
Power Blazer 387
Summary (S-OAM and MPLS-TP OAM)

RX Line Utilization meter and value, available with Loopback
function, indicate the line rate utilization percentage (only LBR frames
are considered) received in the last second.

TST RX Rate meter and value, available with Test function, indicate the
quantity of TST frames received in the last second.

Frame Delay meter and value, available with Frame Delay function,
indicate the average of the measured frame delays in the last second.

Frame Loss Ratio meter, available with Frame Loss function,
indicates for both Near-End and Far-End the last measured frame loss
ratio in the last second.

Synthetic Loss Ratio
1
meter, available with Synthetic Loss
1
function,
indicates for both Near-End and Far-End the last measured Synthetic
Loss ratio in the last second.
Note: Refer to S-OAM and MPLS-TP OAM on page 347 for more
alarms/errors/statistics information.
Summary
Refer to S-OAM and MPLS-TP OAM on page 347 for more information on
alarms.
Thresholds
Refer to Thresholds on page 181 for more information.
1. Available with Ethernet OAM.