EXFO FTB/IQS-88000 Series Power Blazer for FTB-2/2Pro/500/IQS-600 - Manual (Page 396)

Test Results
384 FTB/IQS-88000 Series
Summary (S-OAM and MPLS-TP OAM)
Continuity Check (Peer MEP)

Status displays the status of the continuity check with the peer MEP.

TX CCM indicates the count of transmitted CCM frames.

RX CCM indicates the count of valid CCM frames received. A valid
frame for S-OAM has its source MAC address matching the Peer MEP
MAC address; destination MAC address matching either the unit port
Unicast MAC address or a Multicast class 1 address
1
; and VLANs
matching the unit port VLANs. A valid frame for MPLS-TP OAM has its
destination MAC address matching either the unit MAC address,
FF:FF:FF:FF:FF:FF, or 01:00:5E:90:00:00; VLANs matching the unit port
VLANs; and MPL Labels matching the local MPLS Label Stack
configuration.
Status Description
Loss Continuity Loss of Continuity alarm is active.
Mismerge Mismerge alarm is active.
Unexpected MEG Level Unexpected MEG Level alarm is active.
Unexpected MEP Unexpected MEP alarm is active.
Unexpected Period Unexpected Period alarm is active.
Unexpected MD Level Unexpected MD Level alarm is active.
Receiving CCMs CCM frames from the peer MEP are received without alarms.
1. Refer to Unicast/Multicast Addresses for Ethernet OAM on page 623 for more information.