beautypg.com

Assign to capture, Filter configuration – EXFO FTB/IQS-88000 Series Power Blazer for FTB-2/2Pro/500/IQS-600 User Manual

Page 449

background image

Test Functions

Power Blazer

437

Filters

Assign to Capture

Note: Only available when the ETH-CAPTURE software option is enabled. Refer

to Software Option on page 27 for more information.

Assigns the selected filter for packet capture. See Packet Capture on
page 440.

Filter Configuration

Note: Multiple filter criteria is only available when the ADV-FILTERS option is

enabled; otherwise only one criterion is possible. Refer to Software Option
on page 27 for more information.

The filter configuration section allows to configure the filter criteria for the
selected filter. The configuration is only possible when the Enable check
box is cleared.

(“ and “)“, the open and close parenthesis controls the
precedence of operands when more than two operands are used.
Only one level of parenthesis is supported. When no parenthesis
are used, a logical AND has precedence over a logical OR.

Not check box when selected, adds the logical negation (not
equal) operator for the operand filter defined at its right.