EXFO FTB/IQS-88000 Series Power Blazer for FTB-2/2Pro/500/IQS-600 - Manual (Page 411)

Test Results
Power Blazer 399
Traffic - Ethernet
Traffic - Ethernet
From the Test menu, tap Results, Traffic, and when applicable the
Ethernet tab.
Note: For Through Mode test application, the traffic statistics are displayed for
both port directions (P1->P2 and P2->P1).
P1 and P2 Buttons
The P1 and P2 buttons, available with Dual Port topology, allow to
respectively display the alarms/errors for port #1 (P1) or port #2 (P2).
Traffic

Line Utilization (%) indicates the current percentage of the
transmitting/receiving line rate utilization.

Ethernet BW (Mbit/s) indicates the current transmitting/receiving data
rate expressed in Mbit/s.

Frame Rate (frame/s) indicates the current transmitted/received
number of frames (including bad frames, Broadcast frames and
Multicast frames) in frame per second.

Frame Count indicates the total number of transmitted/received valid
and invalid frames.
Frame Type
Displays the TX and RX count of the following frame types.

Multicast indicates the number of multicast frames
transmitted/received without FCS errors. Broadcast frames are not
counted as multicast frames.

Broadcast indicates the number of broadcast frames
transmitted/received without FCS errors.