EXFO FTB/IQS-88000 Series Power Blazer for FTB-2/2Pro/500/IQS-600 - Manual (Page 421)

Test Functions
Power Blazer 409
40/100G Advanced - CFP/CFP2 Control
40/100G Advanced - CFP/CFP2 Control
Note: Not available with Internal Loopback connector.
From the Test menu, tap Functions, 40/100G Advanced, and the
CFP/CFP2 Control tab.
CFP/CFP2 Power Class
Indicates the power class of the inserted CFP/CFP2 module.
CFP/CFP2 Control Pins
Allows the following CFP/CFP2 control pin settings. Refer to the CFP MSA
standard for more information.
Note: To apply any control, first select its check box then clear it; the control is
applied only when the selected check box is cleared.

TX & RX IC RST check box (cleared by default).

Connector Power Rating, choices are:

TX Disable check box (cleared by default).
Connector Power Rating
CFP Power Class 1 (<= 8W)
Power Class 2 (<= 16W)
Power Class 3 (<= 24W) (default)
CFP2 Power Class 1 (<= 3W)
Power Class 2 (<= 6W)
Power Class 3 (<= 9W) (default)