EXFO FTB/IQS-88000 Series Power Blazer for FTB-2/2Pro/500/IQS-600 - Manual (Page 372)

Test Results
360 FTB/IQS-88000 Series
Summary
Summary
Note: Available with Transport and Ethernet (EtherBERT, Through Mode, and
Smart Loopback) test applications. For other test applications see the
corresponding test summary page.
From the Test menu, tap Results, and the Summary tab.

Status indicates the actual test status as follows.

“--”: The test is not running or results are not available.

In Progress: The test is running.

Completed: The test is completed, stopped at the planned time, or
manually stopped when there is no set timer.

Start Time indicates the date and time the test has been started. The
date and time is reset every time the test is restarted or reset.

Test/Power Recovery: Test Recovery (Widows 8 or above) or
Power Recovery (Windows XP), when displayed, indicates that the
test has automatically recovered from a power failure. The number of
occurrences is also displayed next to the Test/Power Recovery field.
Refer to Power Failure Recovery on page 521.

Logger Full, when displayed, indicates that the logger is full. Refer to
Logger on page 328.