EXFO FTB/IQS-88000 Series Power Blazer for FTB-2/2Pro/500/IQS-600 - Manual (Page 388)

Test Results
376 FTB/IQS-88000 Series
Summary (FC BERT)
Summary (FC BERT)
From the Test menu, tap Results, and the Summary tab.

Test Status indicates the actual test status as follows.

“--”: The test is not running or results are not available.

In Progress: The test is running.

Completed: The test is completed, stopped at the planned time, or
manually stopped when there is no set timer.
Once the test is stopped, the test pass/fail verdict is displayed next to
the Status field when enabled. The verdict is Pass when all verdicts are
Pass, the verdict is Fail as soon as one of the verdict is Fail. Refer to
Bit/Pattern Error on page 117 and Latency Tag Insertion on page 119 for
more information.

Start Time indicates the date and time the test has been started. The
date and time is reset every time the test is restarted or reset.

Test/Power Recovery: Test Recovery (Widows 8 or above) or
Power Recovery (Windows XP), when displayed, indicates that the
test has automatically recovered from a power failure. The number of
occurrences is also displayed next to the Test/Power Recovery field.
Refer to Power Failure Recovery on page 521.

Logger Full, when displayed, indicates that the logger is full. Refer to
Logger on page 328.