EXFO FTB/IQS-88000 Series Power Blazer for FTB-2/2Pro/500/IQS-600 - Manual (Page 403)

Test Results
Power Blazer 391
Summary (TCP Throughput)
Summary (TCP Throughput)
From the Test menu, tap Results, and the Summary tab.

Test Status indicates the actual test status as follows.

“--”: The test is not running or results are not available.

In Progress: The test is running.

Completed: The test is completed, stopped at the planned time, or
manually stopped when there is no set timer.

Aborted - : The test is interrupted; stopped before the
set timer. Possible are: TCP Session Closed or Remote
IP Not Found.

Start Time indicates the date and time the test has been started. The
date and time is reset every time the test is restarted or reset.

Test/Power Recovery: Test Recovery (Widows 8 or above) or
Power Recovery (Windows XP), when displayed, indicates that the
test has automatically recovered from a power failure. The number of
occurrences is also displayed next to the Test/Power Recovery field.
Refer to Power Failure Recovery on page 521.

Logger Full, when displayed, indicates that the logger is full. Refer to
Logger on page 328.
TCP Throughput

TCP Connection Status indicates the actual TCP connection status.

“--”: The test is not running or results are not available.

In Progress indicates that the TCP initialization algorithm is in
progress.

Waiting indicates on the remote unit that the test is started but the
TCP initialization algorithm is not initiated by the local unit.