Echelon OpenLNS User Manual
Page 971
OpenLNS Programmer's Reference
934
10 lcaTestResultNoNeuronId
The device has not been assigned a Neuron
ID.
11 lcaTestResultMismatchProgramId
The OpenLNS Server was able to
communicate with the device using both
Neuron ID and subnet/node addressing.
However, the device does not contain the
expected program ID. The device’s program
ID may have been changed by its
application program. Host devices can
modify the program ID of their attached
network interface. The device should be
Removed and Added.
12
lcaTestResultCommSnodeNotVerified
The OpenLNS Server was able to
communicate with the device using Neuron
ID addressing, but could not communicate
with the device using subnet/node
addressing. The OpenLNS Server did not
attempt to verify that the device has been
configured with the proper
domain/subnet/node address because the
device is currently authenticated, and
reading the address would result in
transmitting the key over the network. The
device may have reconfigured itself, the
device may have been reconfigured by
another network management tool, or the
device may be faulty. The device may be
restored using the Commission method.
13 lcaTestResultAuthEnabled
The OpenLNS Server was able to
communicate with the device using both
Neuron ID addressing and subnet/node
addressing. However, the device has
network management authentication
enabled despite the fact that the device’s
AuthenticationEnabled property is set to
FALSE. The device may have enabled
network management authentication itself,
the device may have been reconfigured by
another network management tool, or the
device may be faulty. It may be possible to
restore the device using the Commission
method.
14 lcaTestResultAuthDisabled
The OpenLNS Server was able to