Echelon OpenLNS User Manual

Page 815

OpenLNS Programmer's Reference

778

match the database. This result will be

returned if the router’s domain address

has not been configured.
10 lcaTestResultNoNeuronId
The router has not been assigned a

Neuron ID.
11

lcaTestResultMismatchProgramId
The OpenLNS Server was able to

communicate with the router using both

Neuron ID and subnet/node addressing.

However, the router does not contain the

expected program ID. The router’s

program ID may have been changed by its

application program. Host routers can

modify the program ID of their attached

network interface. The router should be

Removed and Added.
12

lcaTestResultCommSnodeNotVerifie

d
The OpenLNS Server was able to

communicate with the router using

Neuron ID addressing, but could not

communicate with the router using

subnet/node addressing. The OpenLNS

Server did not attempt to verify that the

router has been configured with the

proper domain/subnet/node address

because the router is currently

authenticated, and reading the address

would result in transmitting the key over

the network. The router may have

reconfigured itself, the router may have

been reconfigured by another network

management tool, or the router may be

faulty. The router may be restored using

the Commission method.
13 lcaTestResultAuthEnabled
The OpenLNS Server was able to

communicate with the router using both

Neuron ID addressing and subnet/node

addressing. However, the router has

network management authentication

enabled despite the fact that the router’s

FALSE. The router may have enabled

network management authentication

itself, the router may have been