Echelon OpenLNS - Manual (Page 515)

OpenLNS Programmer's Reference 478
Independent clients.
Syntax tagValue = Object.Tag
Element Description
Object The monitor point or monitor set
object to be acted on.
tagValue The tag associated with the object.
Data Type Variant .
Read/Write Read/write.
Added to API LNS Release 3.0.
MonitorSets
The MonitorSets object contains a collection of MonitorSet objects representing all the
monitor sets on a device. If a device does not support monitor sets, an empty collection will
be returned when you attempt to access this collection. In general, only
NetworkServiceDevices (NSDs) support monitor sets. The following table summarizes the
MonitorSets object.
Description A collection of MonitorSet objects.
Added to API LNS Release 3.0.
Accessed Through AppDevice object.
Network object.
Default Property Item
Methods • Add
• Remove
Properties • ClassId
• Count
• Item
• Parent
• _NewEnum
Methods
The MonitorSets object contains the following methods .
• Add
• Remove
Add
Summary Adds a permanent MonitorSet object to the collection.
This method can only be called when connected to the
OpenLNS Server (after the Network object's Open method
has been called).
You should not add and open a monitor set in the same
explicit transaction. If you create a monitor set while the
network management mode is set to