Resetcause – Echelon OpenLNS User Manual
Page 300
OpenLNS Programmer's Reference
263
object
the information.
Data Type
Long.
Read/Write
Read only.
Added to API
Prior to LNS Release 3.0.
ResetCause
Summary
Contains the cause of the most recent Neuron Chip reset.
This data is available for application devices and router
sides.
Availability
Local, full, and lightweight clients.
Syntax
resetType = detailInfoObject.ResetCause
Element
Description
resetType
The type of reset. The enumerated
values, which are contained in the
ConstResetCauses
constant accessible
through the Visual Basic Object
Browser, are as follows:
0 lcaResetNone
No reset has occurred since the last
time this status was cleared.
256 (0x100) lcaResetPowerup
The last reset was done during a
powerup.
257 (0x101) lcaResetHardware
The last reset was caused by activation
of the reset pin.
258 (0x102) lcaResetWdt
The last reset was caused by a watch
dog timer timeout.
259 (0x103) lcaResetSoftware
The last reset was caused by software.
the information.
Data Type
Long.
Read/Write
Read only.
Added to API
Prior to LNS Release 3.0.