Echelon OpenLNS - Manual (Page 123)

OpenLNS Programmer's Reference 86
System object's PingIntervals
property.
Data Type Integer.
Read/Write Read/write.
Added to API Prior to LNS Release 3.0.
PendingNeuronIdPendingNeuronId_Property
Summary Contains the neuron ID that will be set when the device is
commissioned.
If a device is commissioned with one Neuron ID, then
replaced, then the new Neuron ID is set, the NeuronId
property will still show the old Neuron ID until the
Commission method is called. This property allows the new
Neuron ID to be read before commissioning.
Availability Local, full, and lightweight clients.
Syntax neuronId = adObject.PendingNeuronId
Element Description
neuronId The pending neuron ID.
adObject The AppDevice object to be acted on.
Data Type String.
Read/Write Read only.
Added to API LNS Release 3.0.
Priority
Summary Determines the device’s priority assignment on its channel.
An assignment of 0 indicates that the object is not assigned a
priority slot. If the object is not assigned a priority slot,
messages with priority will still use priority buffers, and will
still be sent before messages without priority. In addition,
messages with priority have the priority bit set, so that
routers will send them out using priority buffers. If a router
has a priority slot defined, the message will be forwarded on
that slot .
Availability Local, full, and lightweight clients.
Syntax priorityValue = object.Priority
Element Description
priorityValue The priority value assigned to the
object. The enumerated values that
you can set for this property, which
are stored in the
ConstLNSNodePriority constant, are
as follows: