Echelon OpenLNS - Manual (Page 940)

OpenLNS Programmer's Reference 903
invoked.
This property defaults to True if the
InstallOptions property was set to
lcaSharedMedia (2) before the
System was opened for the first
time. Otherwise, it defaults to
False.
systemObject The System object to be acted on.
Data Type Boolean .
Read/Write Read/write.
Added to API Prior to LNS Release 3.0.
RemoteChannel
Summary If you are developing a Full client application, you can use
this property to specify the Channel to which your
application’s NetworkServiceDevice is attached .
When a Full client application opens a system, OpenLNS
automatically determines the channel to which the
application’s NetworkServiceDevice is attached. However,
OpenLNS cannot determine the correct channel if the
channel is one of several channels connected by routers that
are configured as repeaters or permanent bridges (the Class
property is set to lcaRepeater, lcaPermanentRepeater or
lcaPermanentBridge).
In this scenario, you can set the RemoteChannel property to
specify the channel to which the NetworkServiceDevice is
attached. You must set this property before you open the
System object. For more information on opening the System
object, see the OpenLNS Programmer’s Guide.
You must explicity set this property before it can be read. If
you attempt to read this property before it has been set, the
LCA, #150 lcaErrNotYetSet exception will be thrown.
Availability Full client.
Syntax channelObject= systemObject.RemoteChannel
Element Description
channelObject The Channel on which the remote
application resides.
systemObject The System object to be acted on.
Data Type Channel object.
Read/Write Read/write.
Added to API Prior to LNS Release 3.0.