Echelon OpenLNS - Manual (Page 883)

OpenLNS Programmer's Reference 846
object type.
Availability Local, full, and lightweight clients.
Syntax systemObject.BeginCommissionEvent objectType
Element Description
systemObject The System object to be acted on.
objectType An integer determining the object
type for which commission events
will be enabled .
The possible values for this
element, which are contained in
the ConstDeviceEventTypes
constant, are as follows:
0 lcaAppDeviceEvent
1 lcaRouterEvent
Added to API Prior to LNS Release 3.0.
BeginLonMarkObjectStatusChangeEvent
Summary Registers your application for the
OnLonMarkObjectStatusChange event. The
OnLonMarkObjectStatusChange event will then be fired each
time an OpenLNS client application changes the status of a
LonMarkObject on the System .
OpenLNS applications are required to respond to license
expiration events as specified in the OpenLNS license
agreement. You can use this method to begin monitoring for
these events.
Availability Local, full, and lightweight clients.
Syntax systemObject. BeginLonMarkObjectStatusChangeEvent
Element Description
systemObject The System object to be acted on.
Added to API Prior to LNS Release 3.0.
BeginMissedEvent
Summary Enables the OnMissedEvent for a system .
You should call this method at initialization if missed events
will be used. In addition, to enable missed events, this
method also causes a ping event to be sent to the NSI every
60 to 90 seconds to ensure that it is still there to receive
events .
Availability Local, full, and lightweight clients.