Echelon OpenLNS - Manual (Page 904)

OpenLNS Programmer's Reference 867
MgmtMode property will be set to
lcaMgmtModeDeferConfigUpdates (1). You will need
to set the property to
lcaMgmtModePropagateConfigUpdates (0) before
resuming normal operations.
If the recovery operation is aborted (by the computer being
turned off, for example), it is possible to resume recovery. To
do this, follow these steps:
1. Call the Open method of the Network object on the
appropriate network.
2. Call the Open method of the System object.
3. Call the RecoverFromNetwork method of the System
object with the resumeRecovery parameter set to True.
Note: The network recovery process should not be considered
a replacement for backing up your network database.
Although the network recovery process initiated by the
RecoverFromNetwork method can recover an entire network,
you may discover inconsistencies in the network database
depending on the network configuration and the size of the
database being recovered.
There are also many parts of an OpenLNS database that are
not recoverable, including most object names, connection
templates, hub/target relationships, and connections
involving Network Service Devices. As a result, you should
examine the recovered database before setting the
MgmtMode property to
lcaMgmtModePropagateConfigUpdates (0) once a
recovery has completed.
For more information on this, see the OpenLNS
Programmer’s Guide.
Availability Local, full, and lightweight clients.
Syntax systemObject. RecoverFromNetwork resumeRecovery, options
Element Description
systemObject The System object for the recovered
network.
resumeRecover A Boolean value specifying
whether the process is resuming
from a previously started recovery.
options A Long indicating the recovery
options.
The valid values for this element,
which are contained in the
ConstRecoveryOptions constant,
are as follows:
1