Echelon OpenLNS - Manual (Page 1058)

OpenLNS Programmer's Reference 1021
lcaErrLnsDsInvalidClientContext 420
Invalid or no client context was supplied.
lcaErrLnsDsImplicitAddress
421
The requested operation is not allowed, as the monitor point uses implicit addressing.
lcaErrLnsDsExplicitAddress
422
The requested operation is not allowed, as the monitor point uses explicit addressing.
lcaErrLnsDsNotOwner
423
The requested operation is not allowed, as the client is not the owner of the object or
process affected.
lcaErrLnsDsNoNameServicesManager
424
Cannot look up the requested name, as there is no name service manager defined.
lcaErrLnsDsNameTooLong
425
The name specified is too long.
lcaErrLnsDsCountMismatch
426
Reference/Lock count mismatch. This could be caused by too many Release calls being
made by the application.
lcaErrLnsDsNotPermanentMonitorSet
428
The requested operation can only be performed on a permanent monitor set.
lcaErrLnsDsNotPermanentMonitorPoint
429
The requested operation can only be performed on a permanent monitor point.
lcaErrLnsDsException
430
An unexpected exception occurred.
lcaErrLnsDsInitUpdateFailed
431
A network variable could not be updated.
Formatter Errors
These are errors returned by the LNS formatter. These errors may be returned when
LNS fails to read data from a resource file properly. These errors will appear in the
format Subsystem: Formatter, #. The LNS values for these errors are
equal to the error number plus 18,500.
lcaErrFormatNotFound
1
Not found.
lcaErrFormatNotImplemented
2
Not implemented.
lcaErrFormatInvalidLocaleData
3
Invalid locale data.
lcaErrFormatTypeNotFound
4
Type not found.