Echelon OpenLNS - Manual (Page 362)

OpenLNS Programmer's Reference 325
A value of 0 indicates that the number
of retries will be calculated based on
the network topology. The default
value is 0.
object The FileTransfer object to be acted on.
Data Type Integer.
Read/Write Read/write.
Added to API Prior to LNS Release 3.0.
RxTimeOut
Summary Specifies the receive timeout value used for file transfer
messages .
Availability Local, full, and lightweight clients.
Syntax timeoutValue = fileTransObject.RxTimeOut
Element Description
timeoutValue The returned receive timeout value in
milliseconds (0–65,535).
The file is automatically closed, and
an exception will be thrown, if no file
transfer messages are received during
the specified interval.
The default value is 0, which means
that the timeout is calculated based
on the network topology.
fileTransObject The FileTransfer object to be acted on.
Data Type Integer.
Read/Write Read/write.
Added to API Prior to LNS Release 3.0.
StartPosition
Summary Specifies the position of the file pointer for a random access
file operation .
Availability Local, full, and lightweight clients.
Syntax positionValue = fileTransObject. StartPosition
Element Description
positionValue The start position value.
A start position of 0 specifies
sequential file access.
A non-zero value causes a seek
operation to be performed before
executing the read or write.