Echelon OpenLNS - Manual (Page 1028)

OpenLNS Programmer's Reference 991
the device template was imported from an external interface file, the configuration
property template file comes from the external interface file. Otherwise, the
configuration property template file is loaded from the device.
lcaErrNsWarningFirst
4030
A symbol denoting the beggining of the error number range reserved for warning codes.
lcaErrNsUpdateCommError
4030
The database updates were successful, but one or more nodes were not updated because
the NSS was unable to communicate with them. The NSS will continue to try to update
the nodes in the background if the UpdateInterval property of the System object is set to
a non-zero value, and you can force a retry with the RetryUpdates method.
You can keep track of which devices are up to date using commissioning events, and by
reading the CommissionStatus property of each AppDevice object . If you are receiving
persistent update failures on a device, you should re-commission the device with the
Commission method.
lcaErrNsUpdateFuncError
4031
The database updates were successful, but one or more nodes were not updated because
the node(s) rejected the update, for example due to an authentication failure. This
usually means that there is a configuration mismatch between the node and the NSS's
database. The NSS will continue to try to update the nodes in the background if the
UpdateInterval property of the System object is set to a non-zero value, and you can
force a retry with the RetryUpdates method.
You can keep track of which devices are up to date using commissioning events, and by
reading the CommissionStatus property of each AppDevice object . If you are receiving
persistent update failures on a device, you should re-commission the device with the
Commission method.
lcaErrNsNeuronStateChangeFail
4032
The NSS's database updates were successful, but one or more nodes were not updated
because the node(s) failed to make a necessary state transition. The NSS will continue
to try to update the nodes in the background if the UpdateInterval property of the
System object is set to a non-zero value, and you can force a retry with the RetryUpdates
method.
You can keep track of which devices are up to date using commissioning events, and by
reading the CommissionStatus property of each AppDevice object . If you are receiving
persistent update failures on a device, you should re-commission the device with the
Commission method.
lcaErrNsNodeUpdateDisallowed
4033
The database updates were successful, but one or more nodes could not be updated
because they are in the wrong state. The NSS will continue to try to update the nodes in
the background if the UpdateInterval property of the System object is set to a non-zero
value, and you can force a retry with the RetryUpdates method. You can keep track of
which devices are up to date using commissioning events and by reading the
CommissionStatus property of each AppDevice object . If a node is applicationless, you
must reload the application using the AppDevice .load method.
You can keep track of which devices are up to date using commissioning events, and by
reading the CommissionStatus property of each AppDevice object . If you are receiving