Echelon OpenLNS - Manual (Page 829)

OpenLNS Programmer's Reference 792
properties are read-only.
2 lcaStateUncnfg
The application is loaded but the
configuration is either not loaded, being
reloaded, or deemed corrupted due to a
configuration checksum error. A
Neuron Chip also can make itself
unconfigured by calling the Neuron C
function go_unconfigured(). The
router's service LED flashes at a one
second rate in this state.
3 lcaStateNoApplUncnfg
No application is loaded yet, the
application is in the process of being
loaded, or the application has been
deemed corrupted due to an application
checksum error or signature
inconsistency. The application does not
run in this state. The router's service
LED is steadily on in this state.
4 lcaStateCnfgOnline
Normal router state. The application is
running and the configuration is
considered valid. This is the only state
in which messages addressed to the
application are received. In all other
states, they are discarded. The router's
service LED is off in this state.
6 lcaStateCnfgOffline
Application loaded but not running.
The configuration is considered valid in
this state; the network management
authentication bit is honored. The
router's service LED is off in this state.
12 lcaStateSoftOffline
The router has an application, is
configured, and is soft-offline. It will go
online when it is reset or when
requested to go online. The router's
service LED is off in this state.
140 lcaStateCnfgBypass
The application confirmed the offline
request, but is still running (bypass
mode). The router's service LED is off
in this state.
object The router to be acted on.