Echelon OpenLNS - Manual (Page 149)

OpenLNS Programmer's Reference 112
Syntax bmpFilePath = object.BitmapFilePath
Element Description
bmpFilePath The bitmap path and file name.
object
The object to be acted on.
Data Type String.
Read/Write Read/write.
If you write to this property, you must specify the bitmap’s full
path and file name (for example, C:\MyBMPs\Object.BMP).
Added to API Prior to LNS Release 3.0.
ClassId
Summary Identifies the object class of this object.
Availability Local, full, lightweight, and independent clients. Note that
some objects containing this property are not available to
Independent clients.
Syntax classIdValue = object.ClassId
Element Description
classIdValue The object class of the object. The
following value is defined for the
Channel object in the ConstClassIds
constant:
12 lcaClassIdChannel
object The object to be acted on.
Data Type Integer.
Read/Write Read only.
Added to API Depends on the object used to access the property. Generally,
this property exists for an object as soon as the object is
added to the API.
Comments This property allows the object type to be determined when it
is unknown (for example, when the object was accessed using
the Parent property of another object).
Delay
Summary Represents the average number of milliseconds required for a
packet to get onto the channel once queued.
This property allows OpenLNS applications to specify the
number of milleseconds expected to send a message and
receive an acknowledgment on the specified channel, so that
automatic timer calculations made by OpenLNS can be
affected accordingly. When this property contains the default
value of 0, the delay used will be equivalent to the time
required for two packet cycles, based on the average packet