Echelon OpenLNS - Manual (Page 113)

OpenLNS Programmer's Reference 76
whether all database changes have been propagated to the
physical device.
Availability Local, full, and lightweight clients.
Syntax cmValue = appDeviceObject.HasBeenCommissioned
Element Description
cmValue A Boolean type indicating the
commission state.
appDeviceObject The AppDevice object to be acted on.
Data Type Boolean.
Read/Write Read only.
Added to API Prior to LNS Release 3.0.
IconFilePath
Summary Specifies the path and file name of an icon (*.ICO file)
representation of the object.
Availability Local clients.
Syntax IconFilePathFileName = object.IconFilePath
Element Description
IconFilePathFileName Icon file and path name
object
The object to be acted on.
Data Type String.
Read/Write Read/write.
If you write to this property, you must specify the bitmap’s
full path and file name (for example,
C:\MyICOs\Object.ICO).
The icon file should contain the following representations:
• Standard (32x32 pixels) with 256 colors
• Small (16x16) with 16 colors
• Monochrome (32x32)
• Large (48x48) with 256 colors
Added to API Prior to LNS Release 3.0.
InitialAuthenticationKey
Summary Contains the initial authentication key to be used when
commissioning an application device.
This property must be set prior to commissioning an
application device that has network management
authentication enabled, and has been previously
commissioned outside of LNS, or commissioned on a different
OpenLNS network. In these circumstances, OpenLNS will
not be able to communicate with the device without knowing