Methods, Commission, Commission m – Echelon OpenLNS User Manual
Page 804
OpenLNS Programmer's Reference
767
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Methods
The Router object contains the following methods
.
•
•
•
•
•
•
•
•
•
•
•
Commission
Summary
object with a physical router, and loads
the router’s network image.
When commissioning a router while in communication with
the near side of the router, the Neuron ID of the near side
must be set. If not connected to the network, or not in
communication with the network, the Neuron ID must be set
for the near side and the far side of the router.
When commissioning is complete, a router is placed in the
lcaStateCnfgOnline state.
Do not read or write to the State property of a Router in the
same explicit transaction with this method.
In addition, you must set the InitialAuthenticationKey
property to the proper value before commissioning an
application device or router that has network management
authentication enabled, and has been previously
commissioned outside of OpenLNS, or commissioned on a
different OpenLNS network. In these circumstances,
OpenLNS will not be able to communicate with the device or
router without knowing its authentication key, since the