Echelon OpenLNS - Manual (Page 1057)

OpenLNS Programmer's Reference 1020
lcaErrLnsDsVniCloseFailed 402
There was an error closing the VNI.
lcaErrLnsDsThreadCreateFailed
403
There was an error creating the thread.
lcaErrLnsDsNotTemporaryMonitorSet
404
The requested operation can only be performed on temporary monitor sets.
lcaErrLnsDsNotTemporaryMonitorPoint
405
The requested operation can only be performed on temporary monitor points.
lcaErrLnsDsNssNotOpen
406
NSS must be opened before the requested operation can be carried out.
lcaErrLnsDsNssCreateClientFailed
407
There was an error creating the NSS client.
lcaErrLnsDsNssInitFailed
408
There was an error initializing NSS.
lcaErrLnsDsNssException
409
Error occurred during an NSS operation.
lcaErrLnsDsReadFailed
410
Network variable read failed.
lcaErrLnsDsWriteFailed
411
Network variable write failed.
lcaErrLnsDsPollFailed
412
Network variable poll failed.
lcaErrLnsDsSendFailed
413
Application message transmission failed.
lcaErrLnsDsMsgRejected
414
Application message rejected, as network management commands are restricted.
lcaErrLnsDsRequestFailed
415
Application message request failed.
lcaErrLnsDsResponseFailed
416
Application message response failed.
lcaErrLnsDsAddressNotAvailable
417
The source node address is not available.
lcaErrLnsDsIllegalHexCharacter
418
An illegal hexadecimal character was specified in the string.
lcaErrLnsDsTooManyClients
419
There are too many clients connected to the server.