Echelon OpenLNS - Manual (Page 813)

OpenLNS Programmer's Reference 776
subnet/node addressing, but could not
communicate with the router using
Neuron ID addressing. However, through
the use of subnet/node addressed
messages, the OpenLNS Server has
verified that the router contains the
expected Neuron ID. This might be
caused by intermittent router or channel
failures. You may want to retry this
method to see if the error persists.
4 lcaTestResultCommSnode
The OpenLNS Server was able to
communicate with the router using
Neuron ID addressing, but could not
communicate with the router using
subnet/node addressing. The OpenLNS
Server was unable to verify whether the
router has been configured with the
proper domain/subnet/node address. The
router may have reconfigured itself, the
router may have been reconfigured by
another network management tool, or the
router may be faulty. The router may be
restored using the Commission method.
5 lcaTestResultSnodeVerified
The OpenLNS Server was able to
communicate with the router using
Neuron ID addressing, but could not
communicate with the router using
subnet/node addressing. However,
through the use of Neuron ID addressed
messages, The OpenLNS Server has
verified that the router contains the
expected subnet/node address. This error
can occur if the target router is in an
unconfigured state. The router may need
to be recomissioned or it may be in the
middle of a two-phase move. It also might
be caused by intermittent router or
channel failures. You may want to retry
this method to see if the error persists.
6 lcaTestResultDuplicateSnode
The OpenLNS Server was able to
communicate with the router using
Neuron ID addressing. However, when
using subnet/node addressing, the
responding router contains a different
Neuron ID. This failure indicates that
multiple routers are configured with the
same domain/subnet/node address. This