Echelon OpenLNS - Manual (Page 845)

OpenLNS Programmer's Reference 808
Data Type String.
Read/Write Read only.
Added to API LNS Release 3.0.
Priority
Summary Determines the router side’s priority assignment on its
channel.
An assignment of 0 indicates that the object is not assigned a
priority slot. If the object is not assigned a priority slot,
messages with priority will still use priority buffers, and will
still be sent before messages without priority. In addition,
messages with priority have the priority bit set, so that
routers will send them out using priority buffers. If a router
has a priority slot defined, the message will be forwarded on
that slot .
Availability Local, full, and lightweight clients.
Syntax priorityValue = object. Priority
Element Description
priorityValue The priority value assigned to the
object. The enumerated values that
you can set for this property, which
are stored in the
ConstLNSNodePriority constant, are
as follows:
127 lcaLNSNodePriorityMax
Represents the maximum number of
priorty slots on any LonTalk channel.
Do not set the MaxPriority property
to a value greater than this.
255 lcaLNSNodePriorityAny
The Object Server will assign the
RouterSide object the next available,
or least used, priority slot on the
channel.
object The RouterSide object to be acted on.
Data Type Integer.
Read/Write Read/write.
Added to API Prior to LNS Release 3.0.
ProgramId
Summary Stores the program ID for the router side.
Every LonMark compliant LONWORKS device uses a
unique, 16-digit, hexadecimal standard program ID that uses