Echelon OpenLNS - Manual (Page 1026)

OpenLNS Programmer's Reference 989
lcaErrNsCpsdTemplateVersion 279
The version of the CP template is unsupported.
lcaErrNsGroupDblimit
280
The number of LonTalk groups has been exceeded. There is a limit of 255 LONtalk
groups per domain. In some case you may form connections using subnet or domain
broadcast, to limit the use of groups. You may also limit the use of groups by using
network variable aliases. These options are specified in the connection description
template used when forming connections.
lcaErrNsNodeidDblimit
281
Number of LonTalk node IDs exceeded. There are 127 LONtalk node Ids per subnet.
OpenLNS will allocate a new subnet, as needed, if the application does not specify the
subnet to be used.
lcaErrNsNssEngineInitTimeout
282
The application timed out starting the NSS engine process (NssEng.Exe). This could be
an indication that LNS is not installed properly. If you encounter this error, you should
try rebooting your PC, or re-installing LNS.
lcaErrNsDmtNotFound
283
The dynamic message tag cannot be found.
lcaErrNsDmtDblimit
284
The maximum number of dynamic message tags has been exceeded. A single device can
support up to 65,534 dynamic message tags, including internally defined message tags
created for use with message points. You can add and remove message tags from a device
with the Add and Remove methods of the MessageTags collection.
lcaErrNsLmobjNotDynamic
285
The specified LonMarkObject is not dynamic. This exception may be thrown if you
attempt to assign a network variable to a static LonMarkObject with the
AssignNetworkVariable method, unassign a network variable from a static
LonMarkObject with the UnassignNetworkVariable method, or delete a static
LonMarkObject with the Remove method.
You can determine if a LonMarkObject is dynamic or not by reading its
IsDynamicproperty.
lcaErrNsLmobjNvNotDynamic
286
The specified network variable is not dynamic. This exception may be thrown if you
attempt to assign a static network variable to a LonMarkObject with the
AssignNetworkVariable method, unassign a static network variable from a
LonMarkObject with the UnassignNetworkVariable method, or delete a static network
variable with the Remove method.
You can determine if a network variable is dynamic or not by reading its IsDynamic
property.
lcaErrNsLmobjInUse
287
The specified LonMarkObject is in use, and at least one of its member network variables
is bound. This error may be thrown if you use the Remove or RemoveByIndex methods to
delete a LonMarkObject with the lcaLonMarkObjectRemoveNVs (1) option set as the
removalFlags element, and that LonMarkObject contains bound network variables.