Echelon OpenLNS - Manual (Page 1048)

OpenLNS Programmer's Reference 1011
A service which is only available local to the server or on a Full client has been requested
from a Lightweight client.
lcaNotAnNsiHost
118
The (hosted) device does not execute the NSI firmware, and the requested service can not
be completed therefore.
lcaErrInterfaceNotModifyable
119
An attempt to dynamically modify a static interface was made. To support dynamic
interface modifications, dynamic network variables might be supported by implementing
the wink command extensions as documented in the LonMark Application Layer (7)
Interoperability Guidelines, Version 3.1 or better.
lcaErrNoConnectionToServer
120
There is no communication with the OpenLNS Server. This error may occur for a remote
client operation when the OpenLNS Server has shutdown.
lcaErrInvalidInitString
121
The AddNvFromString or InitFromString method was provided with an invalid string.
lcaErrReadOnlyInContext
122
Contact customer support.
lcaErrInvalidPropChangeEvent
123
Contact customer support.
LcaNotAllowedWhenIndependent
124
The called service doesn't work in server-independent mode.
LcaNetworkNotOpen
125
The network is not open.
LcaCantReadMsgPoint
126
The object server is unable to read the message point.
LcaOpenCloseTypeMismatch
127
If the Network object's Open method is used to open a network, the Close method must be
used to close it. If the OpenIndependent method is used to open the network, the
CloseIndependent method must be used to close it.
LcaInvalidDomainLength
128
The domain is the wrong length.
LcaDatabaseRecoveryFailed
129
The database recovery operation failed.
LcaOnlyAllowedOnLocalVNI
130
The requested service is not available on a remote Full client.
LcaInvalidHexValue
131
An invalid hexadecimal value was supplied.
LcaUniqueNVNameRequired
132