Echelon OpenLNS - Manual (Page 805)

OpenLNS Programmer's Reference 768
device has authentication enabled. If the
InitialAuthenticationKey is set prior to commissioning the
device or router, OpenLNS will use this key to authenticate
messages sent to the device or router during the
commissioning process.
See the OpenLNS Programmer’s Guide for more information
on the steps you should take when installing devices on a
network and commissioning those devices.
Availability Local, full, and lightweight clients.
Syntax object.Commission
Element Description
object The Router object to be commissioned.
Added to API Prior to LNS Release 3.0.
CommissionEx
Summary Associates a Router object with a physical router, and loads
the router’s network image. This method is the same as the
Commission method except that it provides additional
options that you can choose from when commissioning the
router (see the description of the options element for more
information).
Availability Local, full, and lightweight clients.
Syntax object.CommissionEx options
Element Description
object The Router object to be commissioned.
options A Long value indicating the options to be
used when commissioning the router. This
determines whether the changes caused by
the commission process will be applied to
the physical router if the network
management mode is set to
lcaMgmtModeDeferConfigUpdates (1).
The values for this element, which are
stored in the ConstCommissionFlags
constant, are as follows:
0 lcaCommissionFlagNone
Updates the device as soon as the
network management mode is set to
lcaMgmtModePropagateConfigUpd
ates (0).
Use this option if you do not want the
device to be updated if the network
management mode property is set to
lcaMgmtModeDeferConfigUpdates