Echelon OpenLNS - Manual (Page 1030)

OpenLNS Programmer's Reference 993
lcaErrNsUpdateCpFailure 4038
The database updates were successful, but the configuration properties on one or more
devices could not be updated as a result of invalid configuration property definitions.
The NSS will continue to try to update the nodes in the background if the
UpdateInterval property of the System object is set to a non-zero value, and you can
force a retry with the RetryUpdates method.
You can keep track of which devices are up to date using commissioning events, and by
reading the CommissionStatus property of each AppDevice object . If you are receiving
persistent update failures on a device, you should re-commission the device with the
Commission method.
lcaErrNsUpdatesDeferred
4039
The database updates were successful, but the configuration properties on one or more
devices could not be updated because the MgmtMode is currently set to
lcaMgmtModeDeferConfigUpdates (1). You can update all the devices on the network
with all pending updates by setting the MgmtMode property to
lcaMgmtModePropagateConfigUpdates (0).
You can also update a single device with its pending device-only configuration changes
while the MgmtMode property is still set to lcaMgmtModeDeferConfigUpdates (1) with
the PropagateDeviceConfigUpdates method.
lcaErrNsWarningLast
4089
A symbol denoting the end of the error number range reserved for warning codes.
Network Interface Errors
These errors are returned by the OpenLNS network interface. These errors will appear
in the format NI: #. The LNS values for these errors are equal to the
error number plus 16,500.
lcaErrNiNoDevice
1
No network device is present.
lcaErrNiDriverNotOpen
2
The network driver could not be opened.
lcaErrNiDriverNotInit
3
The network driver required initialization
lcaErrNiDriverNotReset
4
The network driver required a reset.
lcaErrNiDriverError
5
An error occurred while communicating with the network driver.
lcaErrNiNoResponses
6
No message was received during the wait time.
lcaErrNiResetFails
7
The reset completion code was not received.
lcaErrNiTimeout
8