Winco DGC-2020 - Manual (Page 74)

Click on the Activate button when you are ready to enter the activation key you received from Basler
Electric. The Device Needs Activated pop-up will appear. Refer to Figure 4-5.
Entering an Activation Key
Select the device from the Device pull-down menu. Enter your Email Address and Activation Key
provided by Basler Electric. If you received an email containing the Activation Key, you can select all of
the text in the email and copy it to the Windows
 clipboard using normal Windows techniques. The Get
Data button will extract the Device, Email Address, and Activation Key from the Windows  clipboard and
paste it into the appropriate fields. Click on the Activate button to continue. The Device Needs Activated
screen is also found by selecting Activate Device from the Tools pull-down menu of the BESTCOMSPlus
main shell.
Figure 4-5. Device Needs Activated
COMMUNICATION
If connecting to the DGC-2020 through the USB or modem port, click Communication on the menu bar,
followed by New Connection and DGC-2020 as shown in Figure 4-6. The DGC-2020 Connection screen
shown in Figure 4-7 will appear. If Ethernet communication is desired, skip to Ethernet Communication.
Figure 4-6. Communication, New Connection, DGC-2020
4-4 DGC-2020 BESTCOMSPlus Software 9400200990 Rev K