Winco DGC-2020 - Manual (Page 6)

iv DGC-2020 Introduction 9400200990 Rev K
BESTCOMSPlus
Version and Date Change
2.03.00, 01/09  Added Export to File feature.
 Added settings for Phase Toggle and Initializing Messages on
General Settings, Front Panel HMI screen.
 Re-arranged
CANbus Setup screen and added ECU Setup screen
under Communications.
 Added settings for 51-3 element under Generator Protection, Current.
 Added setting for Off Mode Cooldown on System Parameters,
System Settings screen.
 Added
Remote Module Setup screen under System Parameters.
 Added
Remote LSM Inputs settings and metering screens under
Programmable Inputs.
 Added settings to Bias Control screens for Var/PF control.
 Added kVar A, B, C, and Total to Power and Summary metering
screens.
 Re-arranged MTU metering screens.
 Added
MTU Status screen and MTU Engine Status screen.
 Added BESTlogic+ Input Objects for Configurable Elements,
Configurable Protection, Front Panel Buttons, PF Mode Active, Pre
Start Input, and Run Input.
 Added BESTlogic+ Pre-Alarms for Checksum Fail and CEM
Hardware Mismatch.
 Added BESTlogic+ Elements for 51-3, COOLSTOPREQ,
COOLDOWNREQ, EXTSTARTDEL, PRESTARTOUT,
RUNOUTPUT, STARTDELBYP, and STARTOUTPUT.
 Added Relay Control settings on System Parameters, System
Settings screen.
 Added support for CEM-2020H.
2.01.00, 07/08
 Added settings for AEM-2020.
 Added settings for Automatic Generator Protection.
 Added settings for Integrating Reset on 51 function.
 Added settings for Configurable Protection.
2.00.01, 04/08  Added settings for CEM-2020.
1.04.01, 12/07  Added settings for LSM-2020.
1.03.00, 08/07  Added/Updated screens to support firmware version 1.02.00. (See
firmware history below for details.)
 Added password protection for portions of the programmable logic.
 Made all status LEDs available as inputs for PLC logic.
1.02.00, 05/07  Added Spanish language support.
 Added
Clock Setup screen.
 Changed layout of several screens.
1.01.02, 04/07  Removed International Modem option from Style Chart.
1.01.01, 02/07  Added Chinese language support.
1.00.07, 11/06  Initial
release