Winco DGC-2020 - Manual (Page 150)

Outputs
Contact Outputs
This screen indicates the status of contact outputs. The status is TRUE when the corresponding LED is
green. Refer to Figure 4-81.
Figure 4-81. Metering, Outputs, Contact Outputs
Configurable Elements
This screen indicates the status of configurable elements. It also indicates alarms and pre-alarms of
configurable elements. The status is TRUE when the corresponding LED is green. Refer to Figure 4-82.
Figure 4-82. Metering, Outputs, Configurable Elements
Remote Contact Outputs
When an optional CEM-2020 (Contact Expansion Module) is connected, the status of the remote contact
outputs is shown on this screen. The status is TRUE when the corresponding LED is green. Refer to
Figure 4-83.
4-80 DGC-2020 BESTCOMSPlus Software 9400200990 Rev K