Winco DGC-2020 - Manual (Page 40)

NOTE
The HIGH COOLANT TEMP and LOW OIL PRESSURE alarms have an
ARMING DLY setting that disables the alarm for the specified time after engine
startup.
 SENDER FAIL
o COOL TEMP SENDR FAIL
 CONFIG TYPE
 ACTIVATN DLY
o OIL PRESS SENDR FAIL
 CONFIG TYPE
 ACTIVATN DLY
o FUEL LEVL SENDR FAIL
 CONFIG TYPE
 ACTIVATN DLY
o VOLTAGE SENSE FAIL
 CONFIG TYPE
 ACTIVATN DLY
o SPEED SENDR FAIL
 TIME DELAY
GENERATOR PROTECTION
 27 UNDERVOLTAGE
o 27-1 / 27-2
 LOW LINE SF
 3 / 1 PHASE SETTINGS
 PICKUP
 HYSTERESIS
 TIME
DELAY
 FREQ
INHIBIT
 ALARM
CONFIG
 59 OVERVOLTAGE
o 59-1 / 59-2
 LOW LINE SF
 3 / 1 PHASE SETTINGS
 PICKUP
 HYSTERESIS
 TIME
DELAY
 ALARM
CONFIG
 47 PHASE IMBALANCE (Optional)
o PICKUP
o HYSTERESIS TIME DELAY
o ALARM CONFIG
 81 O/U FREQUENCY
o UNDERFREQUENCY
 INHIBIT VOLTS
 PICKUP
 HYSTERESIS
 TIME
DELAY
 ALARM CONFIG
o OVERFREQUENCY
 PICKUP HYSTERESIS
 TIME DELAY
 ALARM CONFIG
 51 OVERCURRENT (Optional)
o 51-1 / 51-2 / 51-3
 LOW LINE OVERRIDE
 SCALE
FACTOR
 3 / 1 PHASE SETTINGS
 PICKUP
 TIME
DIAL
2-14 DGC-2020 Human-Machine Interface 9400200990 Rev K