Winco DGC-2020 - Manual (Page 169)

Name Description Symbol
Hi Coolant Temp TRUE when the High Coolant Temp Alarm settings
have been exceeded.
Low Coolant Level TRUE when the Low Coolant Level function is
configured as an Alarm and the activation delay has
expired. In addition, TRUE when CANbus is enabled
and the Low Coolant Level Alarm threshold has
been exceeded.
Low Fuel Level TRUE when the Low Fuel Level Alarm settings have
been exceeded.
Low Oil Pressure TRUE when the Low Oil Pressure Alarm settings
have been exceeded.
Oil Pressure
Sender Fail TRUE when the Oil Pressure Sender Fail is
configured as an Alarm and the activation delay has
expired.
Overcrank TRUE when an Overcrank condition exists.
Overspeed TRUE when the Overspeed Alarm settings have
been exceeded.
Speed Sender Fail TRUE when the Speed Sender Fail activation delay
has expired.
Voltage Sensing
Fail TRUE when the Voltage Sensing Fail is configured
as an Alarm and the activation delay has expired.
Pre-Alarms
Analog Expansion
Module
Analog Expansion
Module Comm Fail
TRUE when communication from the AEM-2020 to
the DGC-2020 has been lost.
Analog Expansion
Module
Multiple Analog
Expansion Modules
Detected
TRUE when more than one AEM-2020 is
connected.
Analog Expansion
Module
Remote Analog
Inputs 1-8
TRUE when Over 1, Over 2, Under 1, Under 2, or
Out of Range is configured as a Pre-Alarm and the
threshold has been exceeded. (Over 1 shown.)
Analog Expansion
Module
Remote Analog
Outputs 1-4
TRUE when the analog output connection is open
and the Out of Range Alarm Configuration is set to
Pre-Alarm.
Analog Expansion
Module
Remote RTD Inputs
1-8
TRUE when Over 1, Over 2, Under 1, Under 2, or
Out of Range is configured as a Pre-Alarm and the
threshold has been exceeded. (Over 1 shown.)
Analog Expansion
Module
Remote
Thermocouple
Inputs 1-2
TRUE when Over 1, Over 2, Under 1, or Under 2 is
configured as a Pre-Alarm and the threshold has
been exceeded. (Over 1 shown.)
9400200990 Rev K DGC-2020 BESTlogic+ Programmabl 5-7 e Logic