Compact e-to-e mounting bracket (op-83181), E-to-e mounting bracket (op-42370), Compact e-to-e mounting bracket (op-83181) -17 – KEYENCE SL-V Series User Manual
Page 93: E-to-e mounting bracket (op-42370) -17
3-6
Assembling the Mounting Brackets (SL-VF/VH/VL)
3-17
In
3
SL-V-M-NO3-E
1
Bracket A (1) must be installed to the unit.
2
Two screws must be used to secure bracket A to bracket B (2). (Recommended tightening torque of 0.7 N
•
m)
3
The bracket C must be fit with the bracket B at the opposite side of the secured with two screw at the step 2.
Then, the bracket C (3) must be moved to the direction showing the arrow in figure to fix the angle for align-
ment (4). After deciding the angle for bracket C, the bracket C must be secured with one screw (5). If you
loosen the screw (5) indicated by the procedure, you can adjust the beam axis alignment because the SL-V
can change the angle. (Recommended tightening torque of 1.2 N
•
m)
1
Bracket A (1) must be installed to the unit.
2
Two screws must be used to secure bracket A to bracket B (2). (Recommended tightening torque of 0.7 N
•
m)
3
The bracket C must be fit with the bracket B at the opposite side of the secured with two screw at the step 2.
Then, the bracket C (3) must be moved to the direction showing the arrow in figure to fix the angle for align-
ment (4). After deciding the angle for bracket C, the bracket C must be secured with one screw (5). If you
loosen the screw (5) indicated by the procedure, you can adjust the beam axis alignment because the SL-V
can change the angle. (Recommended tightening torque of 1.2 N
•
m)
Compact E-to-E mounting bracket (OP-83181)
Bracket A
(1)
Bracket B
M3
(length: 7 mm)
(2)
Bracket C
(4)
(3)
M4
(length: 12 mm)
(5)
E-to-E mounting bracket (OP-42370)
Bracket A
(1)
Bracket B
M3
(length: 7 mm)
(2)
Bracket C
(4)
(3)
M4
(length: 12 mm)
(5)