KEYENCE SL-M Series - Manual

1
Corner Mirror for the GL-R/SL-V/SL-C Series
SL-M Series
Instruction Manual
The SL-M Series is a corner mirror dedicated for the Safety Light Curtain GL-R Series, SL-V Series, and SL-C Series (hereinafter called
GL/SL Series).
Read this manual before using the product in order to achieve maximum performance.
Keep this manual in a safe place after reading it so that it can be used at any time.
The following symbols alert you to important messages. Be sure to read these messages carefully.
Confirm that the product packaging includes the following accessories in addition to the SL-M Series itself and 1 copy of the
Instruction Manual.
Symbols
It indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Safety Information for SL-M Series
• Thoroughly read the Instruction Manual for the Safety Light Curtain with which the SL-M Series is used. The Instruction Manual
comes with the Safety Light Curtain.
• Perform tests and maintenance in accordance with the “Checklist” in the GL/SL Series Instruction Manual.
• Do not use the SL-M Series as a retro-reflector for the GL/SL Series.
• Do not use the SL-M Series in locations that are subject to vibrations or mechanical shocks capable of causing a misalignment
in the device installation position or angle.
• Be sure to confirm no deterioration in product quality if you use the SL-M in the presence of substances, such as heavy smoke,
particulate matter, or corrosive chemical agents.
• When disposing the SL-M, always follow the applicable requirements of the laws, rules, regulations and standards in the
country or region where the SL-M is used.
• The SL-M Series should be processed as an industrial waste when being disposed.
Checking package contents
Bracket A Bracket B Hexagonal socket bolt (M6, 5 mm diagonally) Square nut (M6)
Models with lengths less
than or equal to SL-M48H
2 2 12 4
Models with lengths from
SL-M52H to SL-M64H
3 3 18 6
Models with lengths greater
than or equal to SL-M80H
4 4 24 8
Sketch
Specifications
Model
Mirror
length
Applicable
GL/SL Series
Oparating distance
when using GL/SL
Series
Environmental specifications
Material
Weight
(including
mounting
bracket)
Operating
ambient
temperature
Operating
ambient
humidity
SL-M12H 278 mm (10.94")
GL/SL Series units with
lengths shorter than the
mirror lengths to the left
The operating distance
of the GL/SL Series will
become shorter as
shown below.
1 mirror: 90%
2 mirrors: 81%
3 mirrors: 73%
4 mirrors: 66%
(Distances of less than
0.1 m are rounded
down.)
-10 to +55°C
(non-freezing)
35 to 95 % RH
(non-condensing)
Mirror: rear
surface mirror;
Case: Aluminum;
Mounting
brackets: SUS304
Approx. 1.4 kg
SL-M16H 358 mm (14.09") Approx. 1.6 kg
SL-M20H 438 mm (17.24") Approx. 1.8 kg
SL-M24H 518 mm (20.39") Approx. 2.0 kg
SL-M28H 598 mm (23.54") Approx. 2.2 kg
SL-M32H 678 mm (26.70") Approx. 2.4 kg
SL-M36H 758 mm (29.84") Approx. 2.6 kg
SL-M40H 838 mm (32.99") Approx. 2.8 kg
SL-M44H 918 mm (36.14") Approx. 3.0 kg
SL-M48H 998 mm (39.29") Approx. 3.2 kg
SL-M52H 1078 mm (42.44") Approx. 3.7 kg
SL-M56H 1158 mm (45.59") Approx. 3.9 kg
SL-M60H 1238 mm (48.74") Approx. 4.1 kg
SL-M64H 1318 mm (51.89") Approx. 4.3 kg
SL-M80H 1638 mm (64.49") Approx. 5.4 kg
SL-M96H 1958 mm (77.09") Approx. 6.2 kg
96M12074
DANGER
DANGER